CRICKET Sport History

 

The game is played outdoors with bats and a ball between two competing sides (teams) of 11 players each. The sides take turns at batting and bowling (pitching). Two batsmen are up at once, one on either side of the central playing field. Each batsman guards a series of three upright sticks called a wicket, which is topped by two pieces of wood. The bowler delivers the ball toward the wicket of the first batsman and tries to put out, or dismiss, him. One way the bowler can do this is by hitting the wicket with the ball so that one of the pieces of wood falls off. The batsman tries to hit the ball to defend his wicket. If he hits the ball, he can begin a run in an attempt to exchange places with the second batsman. Each time the batsmen switch positions without being put out, they score a run. The side with the most runs at the end of the match wins.

History:

Cricket is believed to have begun (possibly as early as the 13th century) as a game in which country boys bowled at a tree stump or at the hurdle gate into a sheep pen. This gate consisted of two uprights and a crossbar resting on the slotted tops; the crossbar was called a bail and the entire gate a wicket. The fact that the bail could be dislodged when the wicket was struck made this preferable to the stump, which name was later applied to the hurdle uprights. Early manuscripts differ about the size of the wicket, which acquired a third stump in the 1770s, but by 1706 the pitch the area between the wickets was 22 yards long. The ball, once presumably a stone, has remained much the same since the 17th century, weighting between 140 to 170 grams. Its modern weight was established in 1774. The primitive bat was no doubt a shaped branch of a tree, resembling a modern hockey stick but considerably longer and heavier. The change to a straight bat was made to defend against length bowling, which had evolved with cricketers in Hambledon, a small village in southern England.

The bat was shortened in the handle and straightened and broadened in the blade, which led to forward play, driving, and cutting. As bowling technique was not very advanced during this period, batting dominated bowling through the 18th century. 

The cricket ground is a large oval playing field. Grounds vary from an area of well-kept grass in a village to a huge field in a stadium that can seat thousands of spectators. The main playing field at Lord's, England's premier cricket venue, is 5.5 acres (2.2 hectares) in area. The playing surface should be a level field of either natural grass or an artificial covering such as fiber matting or artificial turf. In the center of the cricket ground is the pitch, a rectangular stretch 10 feet (3.05 meters) wide between two wickets, which face each other 22 yards (20.12 meters) apart. A wicket consists of three stumps round straight pieces of wood of equal thickness standing upright 28 inches (71.1 centimetres) out of the ground. The distance between the two outer stumps is 9 inches (22.86 centimetres), with the third midway between. Lying loosely in grooves across the top of the stumps are two pieces of wood called bails, each 45 /16 inches (10.95 centimetres) long. A white line, 8 feet 8 inches (2.64 meters) long, is drawn on the turf in line with the wickets. This is called the bowling crease. A similar line, the popping crease, is drawn 4 feet (1.22 meters) from the wicket and parallel to the bowling crease. At right angles to these creases are two lines called the return creases, which extend from the popping crease to 4 feet (1.22 meters) behind the bowling crease. These four lines indicate the batsman's ground, the area he must stand in to receive the ball. The bat is paddle shaped, with a handle of spliced cane and a long, flat blade made of willow. Its length varies but cannot exceed 38 inches (96.5 centimetres), including the handle. The blade must not be wider than 41 /4 inches (10.8 centimetres). The ball is made with a core of cork,

around which are wound layers of string. A cover of heavy leather is sewed over the ball, with raised stitching around the center (called the seam). The ball is about the size of a baseball. In men's cricket, the ball must weight not less than (155.9 grams) nor more than (163 grams) and must be not less than 813/16 inches (22.4 centimetres) nor more than 9 inches (22.9 centimetres) in circumference. In women's cricket, the ball must weigh between (140 grams) and (151 grams), with a circumference between 81 /4 inches (21 centimetres) and 87 /8 inches (22.5 centimetres). The ball is traditionally red, but white balls are often used for better visibility at night games and under artificial light. The traditional dress is white pants, shirts, V-necked sweaters (often trimmed with club colors), and leather shoes (called boots). In one-day matches in whom a white ball is used, however, the players often wear brightly colored clothing. Batsmen wear pads (protective leggings), batting gloves, an abdominal protector, and often a visor-ed helmet and other kinds of body protection. The fielder playing the position of wicket keeper also wears pads and protective gloves.

The Game:

Cricket is played by two teams, each consisting of 11 players. Substitutions can be made only for injured or ill players. The teams take turns batting and fielding. Each turn is called an innings (always in plural). At the start of the match, a coin toss determines which side has the choice of batting or fielding first. Two players are always at bat at the same time, one at each wicket. The batsman whose turn it is to receive the ball is called the striker. When receiving the ball, the striker must keep one foot between the bowling crease and the popping crease. The second batsman must have at least the tip of his bat behind the popping crease on his side of the pitch. All 11 players on the fielding team play at once, with one as bowler, one as wicket keeper, and the rest scattered into positions around the pitch. The bowler stands behind the bowling crease at the wicket opposite the striker. The wicket keeper squats behind the striker's wicket. The bowler takes a short run and then releases the ball with an overhand motion. Bowling differs from pitching in that the arm must be kept straight when raised above the shoulder. The object of the bowler is to hit the opposite wicket with the ball. The batsman's object is to protect his wicket by striking the ball out of the way or by letting it glance off his bat out into the field. There are no foul lines. After the bowler has pitched six times, an ―over‖ has been completed and another fielder becomes the bowler at the opposite wicket. The new bowler delivers the ball in the reverse direction, while the second batsman defends his wicket. Runs are scored when the striker hits the ball and the two batsmen exchange places without being put out by the fielding team. Each exchange of the batsmen counts as one run. At most,six runs are allowed from one hit. If the striker hits the ball outside the boundary of the field, he automatically earns six runs (or four if the ball bounces first), without having to exchange places with the other batsmen.

There are 10 ways a batsman can be put out. The first five types of out in the following list are fairly common. The last three are called only rarely.

1: The batsman is ―bowled out‖ if the bowler hits the wicket with the ball and dislodges a bail. The ball usually bounces off the ground once before hitting the wicket, but it does not need to. 

 2: If a ball hit by the batsman is caught by any fielder before it touches the ground, the batsman is ―caught out.

3: The batsman is ―stumped‖ if he steps outside the popping crease without having hit the ball and the wicket keeper knocks off a bail with the ball or with the hand holding the ball. 

4: If a batsman stops with his legs or body a ball that in the judgment of the umpire would have struck the wicket, he is out ―leg before wicket,‖ or LBW. 

 5: If a bail is knocked off a wicket by any fielder who holds the ball while the two batsmen are trying to make a run, the batsman nearest that wicket is ―run out.If the batsman has at least the tip of his bat within his ground (behind the popping crease), however, he cannot be run out. 

 6: If a batsman knocks a bail from the wicket while the ball is in play, he is out ―hit wicket.

 7: In a ―handled the ball‖ out, the batsman is dismissed if he intentionally touches the ball with the hand not holding the bat, without the permission of the other side. 

8: In a ―hit the ball twice‖ out, the batsman is dismissed for striking the ball after it has already touched any part of his body, unless the second hit is in defense of his wicket. 

9: Either batsman can be called out for ―obstructing the field, or intentionally obstructing or distracting any member of the fielding side with words or actions. 

 10: An incoming batsman is ―timed out‖ if he takes longer than three minutes to take his place on the field.

Two or three umpires officiate the game. However, the umpires do not call an out unless the players on the fielding side request a ruling, usually by asking ―How's that? (pronounced ―Howzat?). The batsman may also voluntarily acknowledge that he is out.

The umpires award a run called an extra to the batting side in the following four situations.

1. If the bowler delivers the ball improperly for example, if he lands outside the popping crease or bends or jerks his arm while bowling the ball: the batting side earns a run for a ―no ball.

 2. If the bowler delivers the ball outside the reach of the striker, the ball is called a ―wide.

 3. If the striker misses the ball and the wicket keeper fails to stop it, the batsmen can try to exchange places. If they do so without being put out, their side earns a ―bye.

4. If the ball hits any part of the striker's body and the batsmen run and change places, their side earns a ―leg bye.When a batsman is put out, another player on his side takes over as striker. Each team stays at bat until 10 players are out, the 11th player having no partner at the opposite wicket. However, a draw is called if all the innings are not completed by the end of the allotted playing time. The captain of a batting team may call his innings closed before all 10 players bat if he believes a draw might otherwise occur.

NOTEABLE POINTS:

Highest governing body: International Cricket Council ICC. 

Team members: 11 per side. Pitch Size: 10 feet (3.05 meters) wide 22 yards (20.12 meters) long. 

Wicket Size: 28 inches (71.1 cm) long / Thickness (1.25 inches in diameter). 

Bails Size: Each (10.95 cm) long. 

Bat Size: Its length varies but cannot exceed 38 inches (96.5 cm), including the handle. 

The blade must not be wider than 41 /4 inches (10.8 cm). Ball Size: (155.9 grams) to (163 grams). (22.4 cm) to (22.9 cm) in circumference. 

 In women's cricket, the ball must weigh between (140 grams) to (151 grams), with a circumference between (21 cm) to (22.5 cm). 

Olympic: 1900s 

National Game: England